MODEL | 212.0## (except 212.007/074/075/076/092/093/094/095) 1# up to 4/12/13, 212.1## (except 212.195) 1# up to 4/12/13, 212.2## (except 212.207/274/275/276/292/298) 1# up to 4/12/13 |
up to model year 2014 | |
with CODE 275 (Electrically adjustable front seats memory package) | |
without CODE 289 (Wood/leather steering wheel) | |
without CODE 494 (US version) | |
without CODE 498 (Japanese version) | |
without CODE 950 (AMG sport package) | |
MODEL | 212.0## (except 212.007/074/075/076/092/093/094/095) 1# up to 4/12/13, 212.1## (except 212.195) 1# up to 4/12/13, 212.2## (except 212.207/274/275/276/292/298) 1# up to 4/12/13 |
up to model year 2014 | |
with CODE 427 (7-speed automatic transmission) | |
without CODE 289 (Wood/leather steering wheel) | |
without CODE 494 (US version) | |
without CODE 498 (Japanese version) | |
without CODE 950 (AMG sport package) |
1 | Steering wheel |
2 | Left front floor covering |
3 | Driver seat |
4 | Left lower A-pillar trim |
5 | Steering column tube switch module |
N25/7 | Steering wheel heater control unit |
P46.11-2098-06
| Remove | ||
1 | Remove door sill molding on front left and rear left | ||
| |||
2 | Remove left lower A-pillar trim (4) | ||
3 | Remove cover below left of instrument panel | ||
4 | Remove left lower B-pillar trim | ||
5 | Remove center console | ||
| |||
6 | Remove accelerator pedal | ||
| |||
7 | Loosen bolts on rear of driver seat (3), remove bolts on front of driver seat (3) and detach front trim from guide rails | ||
| |||
8 | Remove left front floor covering (2) | Observe routing of accelerator pedal wiring harness. | |
9 | Fix driver seat (3) in place with a bolt at the front | ||
10 | Remove steering column tube switch module (5) | ||
| |||
The steering column tube switch module (5) is no longer required. | |||
11 | Remove rear seat cushion | MODEL 212.0/1 | |
| MODEL 212.0 with CODE 224 (Design individual rear seat system) | ||
| MODEL 212.0/1 without CODE 224 (Design individual rear seat system) | ||
12 | Remove left side bolster from rear seat backrest | MODEL 212.0 with CODE 287 (Through-loading feature) | |
| |||
13 | Remove rear seat backrest | MODEL 212.0/1 without CODE 287 (Through-loading feature) | |
| MODEL 212.0/1 without CODE 224 (Design individual rear seat system) | ||
| MODEL 210.0/1 with CODE 224 (Design individual rear seat system) | ||
14 | Remove rear left side paneling | MODEL 212.0/1/2 | |
| MODEL 212.0/1 | ||
15 | Remove the RH panel in the trunk | MODEL 212.0/1/2 | |
| MODEL 212.0/1 | ||
16 | Remove center paneling in trunk | MODEL 212.0/1 | |
| |||
17 | Remove rear SAM control unit with fuse and relay module and place to one side with electrical lines still connected | ||
| |||
Check in the EPC whether the rear SAM control unit with fuse and relay module installed corresponding to the vehicle equipment can be used for retrofitting the steering wheel heater. | |||
| Install | ||
18 | Retrofit steering wheel heater power supply wiring harness |
| |
MODEL 212.0/1 | |||
19 | Retrofit steering wheel heater wiring harness | ||
20 | Install remaining parts | Operation steps 17 to 11 and 9 to 4 | |
21 | Change steering column tube switch module (5) | ||
22 | Install new steering column tube switch module (5) | ||
| |||
23 | Install new steering wheel (1) with integrated steering wheel heater | ||
| |||
24 | Retrofit steering wheel heater control unit (N25/7) | ||
25 | Install remaining parts | Operation steps 3 to 1 | |
26 | Enter special equipment in online vehicle data card via vehicle documentation system (VeDoc) | Add: | |
27 | Document retrofitted equipment through VeDoc | Attach a note "Steering wheel heater retrofitted as per AN46.11-P-0001EW" under field organization texts for DG 46. | |
28 | Connect Star Diagnosis and select vehicle via the vehicle identification number (VIN) | ||
| |||
29 | Perform variant coding with XENTRY using the software calibration number (SCN) | ||
30 | Disconnect Star Diagnosis | ||
| |||
31 | Perform function test of steering wheel heater |
Odkazované dokumenty
- ad0000p200004a Připojení STAR DIAGNOSIS, načtení chybové paměti
- ad0000p200004a
- an4611p000101es
- an4611p000101ew
- an4611p000102ew
- an4611p000103ew
- an4611p000104ew
- ar3012p1321ew Demontáž, montáž pedálu akcelerace
- ar4610p0100ew Demontáž, montáž volantu
- ar5421p1258ew Demontáž, montáž řídicí jednotky SAM s pojistkovým a reléovým boxem v zavazadlovém prostoru
- ar5425p2802ew Demontáž, montáž modulu sloupku řízení
- ar6820p2000ew Demontáž, montáž středové konzoly
- ar6830p4100ew Demontáž, montáž prahové lišty
- ar6830p4600ew Demontáž, montáž obložení v zavazadlovém prostoru
- ar6830p4780cw Demontáž, montáž bočního obložení v zadním prostoru vozidla
- ar9110p1000cw Demontáž, montáž předního sedadla
- ar9112p1020cw Demontáž, montáž sedáku zadního sedadla
- ar9112p1020ew Demontáž, montáž sedáku zadního sedadla
- ar9112p1620cw Demontáž, montáž opěradla zadního sedadla
- ar9112p1620ew Demontáž, montáž opěradla zadního sedadla
- ar9112p1710cw Demontáž, montáž bočního čalounění opěradla zadního sedadla