an4340w100105pr

Attach adhesive label to heat shield, transmission and interior trim

Typ an · téma 43.40 · verze 0100 · 2012-02-10

Platí pro: MODEL 970.0 /2 with TRANSMISSION 712.62 /63, 715.050 /060 with BODY 972.890 except CODE (B95) No antilock brake system except CODE (MK3) Variable vehicle speed limit 30 km/h and backup shift lock for refuse vehicles nicht in Verbindung mit getriebeabhängigem Nebenabtrieb MODEL 974.2 with TRANSMISSION 712.63, 715.060 with BODY 972.890 except CODE (B95) No antilock brake system except CODE (MK3) Variable vehicle speed limit 30 km/h and backup shift lock for refuse vehicles nicht in Verbindung mit getrie

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 43 Vzduchotlaková část brzd a přídavné brzdy › 43.40 Retardér (elektrický) — Řada 970 (modely 0**, 2**) · Řada 972 (modely 890) · Řada 974 (modely 2**)

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.21 Retardér › 21.21.3 Dodatečná montáž/přemontování — Řada 970 (modely 0**, 2**) · Řada 972 (modely 890) · Řada 974 (modely 2**)

Platí také pro motory/převodovky: 712 62*, 712 63*, 715 050, 715 060

AN43.40-W-1001-05PR

Attach adhesive label to heat shield, transmission and interior trim

Danger!

Risk of death caused by working on permanent magnet retarder for groups of persons with implants. Risk of injury caused by burns that may occur due to contact with the hot rotor.

For persons with implants, a minimum distance of 30 cm between the permanent magnet retarder and the body parts of the affected person is to be maintained as a safe distance from the permanent magnet retarder.

Do not touch hot or rotating parts.

AS43.40-Z-0001-01A

Attach adhesive label to heat shield, transmission and interior trim

W43.40-1078-06

1 Stick new adhesive label (1) into trim (2).

Attach adhesive label to heat shield, transmission and interior trim

W43.40-1086-11

2 Clean bonding area on heat shield (4).

3 Glue adhesive label (3) onto heat shield (4).

Attach adhesive label to heat shield, transmission and interior trim

W43.40-1087-08

4 Clean bonding areas on transmission (7).

5 Stick adhesive label (5) at top right in direction of travel onto an easily visible free area on the transmission (7).

6 Stick adhesive label (6) at bottom left in direction of travel onto an easily visible free area on the transmission (7).

Odkazované dokumenty