an4220l000202a

Prepare installation area for external filling connection of compressed-air system

Typ an · téma 42.20 · verze 0100 · 2000-05-24

Platí pro: MODEL 668.###, 670.### ## up to 081120 with CODE (B65) Heated air drier (single-chamber system)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.20 Parkovací brzda — Řada 668 · Řada 670

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.16 Parkovací brzda › 21.16.3 Dodatečná montáž/přemontování — Řada 668 · Řada 670

AN42.20-L-0002-02A

Prepare installation area for external filling connection of compressed-air system

Models 668, 670 up to end no. 081120,
with Code B65.

Prepare installation area for external filling connection of compressed-air system

L42.20-0041-06

Entrance area with angle bracket

1 Entrance

2 Angle bracket A 670 666 02 12

a Location of bore hole,
Dimension a = 147 mm

b Location of bore hole,
Dimension b = 320 mm

c Location of bore hole,
Dimension c = 15 mm

1 Drill two holes 9 mm in the entrance (1), as shown in the figure.

2 Drill a hole in the angle bracket A 670 666 02 12 (2) in the side which has not already been drilled. The hole should have a of 9 mm and be 15 mm from the edge of the entrance (1).

3 Install in the following order:


Angle bracket A 670 666 02 12 (2)
Bracket of filling valve
Bracket at entrance (1)

The parts are secured to the reverse side of the entrance (1) using four hexagon bolts M8X20 (ISO 4017-M8X20-10.9), washers 8.4 (DIN 9021-8.4-140 HV) and hexagon nuts M8
(MBN 10113-M8-10-A).