Solenoid valve 3-4 for shift mechanism - fault code description ME
3-4 shift solenoid valve
1
Fault code
( Readout on generic scan tool)
P2061 (P0763)
2
Fault storage
Actuation of the indicator lamp
- Engine diagnosis (EURO3/4)
- CHECK ENGINE (MIL)
After expiry of test duration and fault
- No activation
- Following two successive driving cycles with faults
3
Checking frequency
Continuous
4
Checked signal or status
Voltage supply
5
Fault setting conditions
Short circuit to ground
Lower limit value for voltage
Upper limit value for voltage
Lower limit value for current
Upper limit value for current
Checking duration
Fault if the voltage is less than 0.4 volts.
Approx. 8.5 V
Approx. 15 V
Approx. 0,3 A flows.
Approx. 0,7 A flows.
Approx. 1 second
6
Faults (actuation line discontinuity or short circuit, short circuit in valve) are recognized by the EGS control unit and reported to the ME control unit via the CAN data bus. Storage of faults and actuation of the CHECK ENGINE indicator lamp (MIL) are undertaken by the ME control unit.