ad0715w500102f
Fuel intake pressure too high, troubleshooting engine control MR (PLD)
Typ ad · téma 07.15 · verze 0105 · 2007-03-27
Platí pro: ENGINE 904.904 /905 /906 /907 /908 /909 /910 /911 /914 /915 /916 /917 /921 /922 /923 /936 /941, 906.910 /911 /915 /916 /919 /920 /921 /922 /923 /925 /926 /927 /928 /939 /940 /941 /942 /943 /951 /952
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 1 Motor › 07 Příprava směsi › 07.15 Systém vstřikování paliva vznětového motoru (PLD), regulace motoru (MR) — Řada 904 (modely 904, 905, 906, 907, 908, 909, 910, 911, 914, 915, 916, 917, 921, 922, 923, 936, 941) · Řada 906 (modely 910, 911, 915, 916, 919, 920, 921, 922, 923, 925, 926, 927, 928, 939, 940, 941, 951, 952)
EinPAS 15 Motor › 15.45 Management motoru › 15.45.1 Základní informace — Řada 904 (modely 904, 905, 906, 907, 908, 909, 910, 911, 914, 915, 916, 917, 921, 922, 923, 936, 941) · Řada 906 (modely 910, 911, 915, 916, 919, 920, 921, 922, 923, 925, 926, 927, 928, 939, 940, 941, 951, 952)
AD07.15-W-5001-02F
| Fuel intake pressure too high, troubleshooting engine control MR (PLD)
|
|
|
Possible cause
| Remedy/test
|
Fuel feed lines kinked or clogged up
| Check lines and connecting pieces for continuity, renew where necessary
|
Intake manifold at fuel-level indicator sensor is in contact with the fuel tank base
| Check intake manifold through the fuel-filling orifice on the fuel tank, where necessary remove fuel-level indicator sensor
|
Sieve on intake manifold/fuel-level indicator sensor clogged
| Remove fuel-level indicator sensor and check sieve, replace where necessary
|
Non-return valve in the fuel feed line connection clogged or not/insufficiently opened (opening bar on neck bent)
| Repair or replace
|