AD07.12-P-6000-25E | IFI test of electrical system glow plug failure |
| Scope of test | Measuring instrument/ Test connection | Operation/Requirement | Specified value | Possible cause/Remedy | ||
1.0 | Glow plug failure Testing glow plugs and cables |
1 (2.1) 2 (2.2) 3 (2.3) 4 (2.4) 5 (2.5) 6 (2.6) |
| N14x2 1 (2.1) 2 (2.2) 3 (2.3) 4 (2.4) 5 (2.5) 6 (2.6) | Ignition: OFF Disconnect coupling N14x2 Make appropriate connection. Ignition: ON Note: If a Multimeter with an adequate current range is not available, a wire jumper can also be inserted instead of the Multimeter and the current measured at the wire jumper using a clip-on ammeter. | 8–15 A The current consumption depends on engine coolant temperature | Pencil-type glow plugs Cables Preglow time-limit relay module (N14) IFI control module (N3/7) |