AD00.00-W-2010-06A | Printer setting for printing out HHT reports | Model all |
| The electronically controlled power supply unit must meet the national regulations for operating electrical appliances. | Technical data for output side: 12 - 24 V / 3A (5A for 1s) 5% controlled, current limiting 3 A, can be operated continuously | |
| A cable with part number 651 0070 99 can be supplied to run the printer. | ||
| Resetting to parallel I/O: - Repeat work steps 1-5 - Change over to PARALLEL I/O with "" button and confirm + with "ENTER" button - Press "ONLINE" button (light On) | ||
| Printer change-over to serial interface applies to printer types - HP Laser Jet IIIp | ||
Work step | Button | Status | Specified value/display |
1 | ONLINE | Press | Light off |
2 | MENU | Press (for more than 5 s) | - HP Laser Jet III: AUTO CONTINUE= - HP Laser Jet IIIp: QUANTITY 1 |
3 | MENU | Press | - HP Laser Jet III: SERIAL I/O PARALLEL I/O - HP Laser Jet IIIp: APPLIANCE CONFIGURATION |
4 HP Laser Jet III only | | Press | SERIAL I/O |
5 | ENTER | Press | - HP Laser Jet III: SERIAL I/O - HP Laser Jet IIIp: CONTINUE OFF |
6 | MENU | Press | - HP Laser Jet III: SERIAL I = RS -232 SERIAL O = RS -422 - HP Laser Jet IIIp: SERIAL I/O PARALLEL I/O |
7 | | HP Laser Jet III: Press (x times) HP Laser Jet IIIp: Press | - HP Laser Jet III: I/O RS -232 - HP Laser Jet IIIp: SERIAL I/O |
8 | ENTER | HP Laser Jet III: Press HP Laser Jet IIIp: Press (x times) | - HP Laser Jet III: I/O RS -232 - HP Laser Jet IIIp: SERIAL I/O |
9 | MENU | Press | BAUD RATE x |
10 | | HP Laser Jet III: Press (x times) HP Laser Jet IIIp: Press | BAUD RATE 9600 |
11 | ENTER | HP Laser Jet III: Press HP Laser Jet IIIp: Press (x times) | BAUD RATE 9600 |
12 HP Laser Jet III only | MENU | Press (x times) | 00 ready |
13 | ONLINE | Press | Light On |