ad0000p200003c

Connect hand-held tester (HHT), read out diagnostic trouble code memory

Typ ad · téma 00.00 · verze 0102 · 2006-07-25

Platí pro: MODEL 163 up to 31.8.01, 168

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 0 Celkový › 00 Celkové vozidlo › 00.00 Všeobecné — Řada 163 · Řada 168

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.15 Síť/multifunkční systém › 25.15.1 Základní informace — Řada 163 · Řada 168

AD00.00-P-2000-03C

Connect hand-held tester (HHT), read out diagnostic trouble code memory

Model 163 up to 31.08.01

Model 168

Commercially available tools

Number

Designation

WH58.30-Z-1036-13A

Handheld tester (HHT)

651 100 01 99

WH58.30-Z-1037-13A

Test cable (multiplexer)

651 100 40 99

WH58.30-Z-1044-13A

Adapter cable (HHT) for datalink connector (X11/4, 16-pin)

Connect hand-held tester (HHT), read out diagnostic trouble code memory

P42.35-0234-06

1 Connect hand-held tester (087) to diagnosis test connector (X11/4) in interior using test cable (multiplexer) (094) and adapter cable (107) .

2 Switch on ignition.

3 According to instructions in display :

a) Read out/erase fault memory

b) Read out actual values

c) Perform actuations

d) Program control modules

4 Disconnect HHT.

087 Hand-held tester (HHT)

094 Test cable (multiplexer)

107 Adapter cable (HHT) for datalink connector (X11/4, 16-pin)

X11/4 Diagnostic data link connector

Note system-specific deviations listed in respective diagnosis description in chapter entitled "Diagnosis Previous Knowledge".

Stored faults possibly caused by cables being disconnected during testing or by simulation must be erased from the fault memory once the work is completed.