Check caster and assign to tabular value

Тип ar · тема 40.20 · версия 0105 · 2016-06-06

Валидно за: Model 906.132/134/136

Не е налично на „bg“; показано на Английски.

Място

Функционална група 2 Ходова част › 40 Колела, измерване геометрията на ходовата част › 40.20 Измерване на геометрията на ходовата част — Серия 906 (модели 132, 134, 136)

EinPAS 20 Ходова част › 20.10 Измерване геометрията на ходовата част › 20.10.20 Диагноза/Проверка/Измерване/Настройка — Серия 906 (модели 132, 134, 136)

AR40.20-D-0322-03C

Check caster and assign to tabular value

Model

906.132/134/136

Test and adjustment values for caster

Number	Designation	Model 906.132/134/136
BE40.20-N-1001-20M	Caster values, form
	See	OF40.20-D-3000-00C

Test and adjustment values for caster

Number	Designation		Model 906.132/134/136
BE40.20-N-1002-20M	Permissible difference in caster between right and left side of vehicle	°	30'

Test and adjustment values for caster

Number	Designation		Model 906.132/134/136
BE40.20-N-1003-20M	Absolute caster tolerance	°	30'

1	Measure level of front axle and rear axle on one side of the vehicle and find the specified value for the caster in the table.

2	Determine actual caster values.

3	Compare specified value for caster against actual caster value and determine whether the permissible tolerance is met.

 The caster cannot be adjusted but it must be checked to ensure the chassis geometry is correct.