ar3320d145202a

Detaching wishbone from steering knuckle and front axle beam

Тип ar · тема 33.20 · версия 0105 · 2001-08-09

Валидно за: FRONT AXLE 730.408 /410 in MODEL 901, 902 FRONT AXLE 730.409 in MODEL 902 FRONT AXLE 730.409 /413 in MODEL 903 FRONT AXLE 730.411 /414 in MODEL 904 FRONT AXLE 732.2 in MODEL 690.6

Не е налично на „bg“; показано на Английски.

Място

Функционална група 2 Ходова част › 33 Преден мост › 33.20 Водене на колелата, главина — Серия 690 (модели 6**) · Серия 901 · Серия 902 · Серия 903 · Серия 904

EinPAS 17 Трансмисия/Мост › 17.50 Преден мост › 17.50.41 Напречен носач/Задвижващ лост/Стабилизатор — Серия 690 (модели 6**) · Серия 901 · Серия 902 · Серия 903 · Серия 904

Валидно и за двигатели/скоростни кутии: 730 408, 730 409, 730 410, 730 411, 730 413, 730 414, 732 2**

AR33.20-D-1452-02A

Detaching wishbone from steering knuckle and front axle beam

Detaching wishbone from steering knuckle and front axle beam

730 589 02 33 00

Puller

Detaching wishbone from steering knuckle and front axle beam

D33.20-0021-01

1 Unscrew nut (13) on wishbone joint.

2 Press steering knuckle (10) off wishbone using puller.

Detaching wishbone from steering knuckle and front axle beam

D33.20-0020-01

3 Unscrew stop plate (7) from wishbone (12).

On versions with anti-roll bar, pull the stop plate hanging on the anti-roll bar upwards and leave hanging.

Detaching wishbone from steering knuckle and front axle beam
Detaching wishbone from steering knuckle and front axle beam

D33.20-0004-01

D33.20-0002-01

4 Undo rear screw joint on wishbone by unscrewing wishbone bolt (2).

5 Undo front screw joint on wishbone by unscrewing wishbone bolt (2).

6 Remove wishbone (12).