Remove, install forked crossmember

Тип ar · тема 31.00 · версия 0300 · 2001-01-25

Валидно за: MODEL 670 with ENGINE 904.904 MODEL 668, 670 with ENGINE 904.908 /914 /923 /936

Не е налично на „bg“; показано на Английски.

Място

Функционална група 2 Ходова част › 31 Рама, движение с ремарке › 31.00 Обща част — Серия 668 · Серия 670 · Серия 904 (модели 904, 908, 914, 923, 936)

EinPAS 35 Каросерия/Рамка/Монтажни елементи › 35.21 Рамка › 35.21.40 Носач/Монтажна конзола/Усилване — Серия 668 · Серия 670 · Серия 904 (модели 904, 908, 914, 923, 936)

AR31.00-D-1100D

Remove, install forked crossmember

9.7.96

MODEL 670 with ENGINE 904.904

MODEL 668, 670 with ENGINE 904.908 /914 /923 /936

D31.00-0002-11

1 Forked crossmember

2 Nut

3 Bolt

Modification notes

17.11.00

Figure modified from 276 Nm to 220 Nm

Figure in BA31.00-N-1001-01A for model 668, 670 modified

 	Removing, installing
1	Unscrew bolts (3)	 Couterhold nuts (2).
			*BA31.00-N-1001-01A
2	Remove forked crossmember (1) from below	 Pay attention to installation position of forked crossmember (1).
3	Install in the reverse order

General information regarding frame, trailer operation

Number	Designation		Model 668, 670


BA31.00-N-1001-01A	Bolt of forked crossmember to bracket	Nm	220